安装玻璃隔墙、门顶部限位槽的宽度应大于玻璃厚度2-4mm，槽深在20-30mm之间，以便注胶。安装方法可由所弹中心线引出两条金属装饰板边线，然后按边线进行门框顶部限位槽的安装。槽口内的木垫板是调整槽深的。通过垫板的增多或减少调整。
The width of the limiting groove on the top of the door and the glass partition wall should be 2-4 mm larger than the glass thickness, and the groove depth should be between 20-30 mm for injection. Installation method can lead out two metal decorative board edge lines from the projected center line, and then install the limit slot on the top of the door frame according to the edge line. The wood cushion in the groove is to adjust the groove depth. Adjust by increasing or decreasing the number of pads.